RFID speed monitoring system

Ahmed Al-Gindy; Ayman Tawfik; Laila Sakhi; Hibaq Mohamad; Manahil Mustafa

doi:10.1109/DeSE.2013.65

RFID speed monitoring system

Ahmed Al-Gindy
, Ayman Tawfik
, Laila Sakhi
, Hibaq Mohamad
, Manahil Mustafa

College of Engineering and Information Technology

Computer College
Ajman University

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

3 Scopus citations

Abstract

The increasing number of speeding related car accidents call for stricter measures to be taken. Radio Frequency Identification (RFID) presents the best ability to identify objects in a certain range. A system was created to approximate the speed of a vehicle travelling between two RFID readers. RFID readers will be placed at known, predetermined distances from each other. The passing vehicle carrying an RFID tag will broadcast its unique number to the reader which will log the exact time this vehicle has passed. By measuring the time the vehicle needed to pass two consecutive readers, the average speed can be calculated. Mean value theorem says that the vehicle's speed must be at some point equal to the average speed calculated. Speeding ticket can be issued immediately if the calculated speed exceeds the speed limit. This technique provides advantages such as, low cost, easy integration, and accurate speed measurement.

Original language	English
Title of host publication	Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013
Editors	Abir Hussain, Roxana Radvan, Naeem Radi, Dhiya Al Jumeily, Hissam Tawfik
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	328-331
Number of pages	4
ISBN (Electronic)	9781479952649
DOIs	https://doi.org/10.1109/DeSE.2013.65
State	Published - 11 Feb 2013
Event	2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013 - Abu Dhabi, United Arab Emirates Duration: 16 Dec 2013 → 18 Dec 2013

Publication series

Name	Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013

Conference

Conference	2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013
Country/Territory	United Arab Emirates
City	Abu Dhabi
Period	16/12/13 → 18/12/13

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 3 Good Health and Well-being

Keywords

RFID
Vehicle average speed measurement
Visual basic

Access to Document

10.1109/DeSE.2013.65

Cite this

Al-Gindy, A., Tawfik, A., Sakhi, L., Mohamad, H., & Mustafa, M. (2013). RFID speed monitoring system. In A. Hussain, R. Radvan, N. Radi, D. Al Jumeily, & H. Tawfik (Eds.), Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013 (pp. 328-331). Article 7041138 (Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/DeSE.2013.65

Al-Gindy, Ahmed ; Tawfik, Ayman ; Sakhi, Laila et al. / RFID speed monitoring system. Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013. editor / Abir Hussain ; Roxana Radvan ; Naeem Radi ; Dhiya Al Jumeily ; Hissam Tawfik. Institute of Electrical and Electronics Engineers Inc., 2013. pp. 328-331 (Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013).

@inproceedings{099374c842be4d88b23ef56e838a805a,

title = "RFID speed monitoring system",

abstract = "The increasing number of speeding related car accidents call for stricter measures to be taken. Radio Frequency Identification (RFID) presents the best ability to identify objects in a certain range. A system was created to approximate the speed of a vehicle travelling between two RFID readers. RFID readers will be placed at known, predetermined distances from each other. The passing vehicle carrying an RFID tag will broadcast its unique number to the reader which will log the exact time this vehicle has passed. By measuring the time the vehicle needed to pass two consecutive readers, the average speed can be calculated. Mean value theorem says that the vehicle's speed must be at some point equal to the average speed calculated. Speeding ticket can be issued immediately if the calculated speed exceeds the speed limit. This technique provides advantages such as, low cost, easy integration, and accurate speed measurement.",

keywords = "RFID, Vehicle average speed measurement, Visual basic",

author = "Ahmed Al-Gindy and Ayman Tawfik and Laila Sakhi and Hibaq Mohamad and Manahil Mustafa",

note = "Publisher Copyright: {\textcopyright} 2013 IEEE.; 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013 ; Conference date: 16-12-2013 Through 18-12-2013",

year = "2013",

month = feb,

day = "11",

doi = "10.1109/DeSE.2013.65",

language = "English",

series = "Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "328--331",

editor = "Abir Hussain and Roxana Radvan and Naeem Radi and \{Al Jumeily\}, Dhiya and Hissam Tawfik",

booktitle = "Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013",

address = "United States",

}

Al-Gindy, A, Tawfik, A, Sakhi, L, Mohamad, H & Mustafa, M 2013, RFID speed monitoring system. in A Hussain, R Radvan, N Radi, D Al Jumeily & H Tawfik (eds), Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013., 7041138, Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013, Institute of Electrical and Electronics Engineers Inc., pp. 328-331, 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013, Abu Dhabi, United Arab Emirates, 16/12/13. https://doi.org/10.1109/DeSE.2013.65

RFID speed monitoring system. / Al-Gindy, Ahmed; Tawfik, Ayman; Sakhi, Laila et al.
Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013. ed. / Abir Hussain; Roxana Radvan; Naeem Radi; Dhiya Al Jumeily; Hissam Tawfik. Institute of Electrical and Electronics Engineers Inc., 2013. p. 328-331 7041138 (Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution › peer-review

TY - GEN

T1 - RFID speed monitoring system

AU - Al-Gindy, Ahmed

AU - Tawfik, Ayman

AU - Sakhi, Laila

AU - Mohamad, Hibaq

AU - Mustafa, Manahil

PY - 2013/2/11

Y1 - 2013/2/11

N2 - The increasing number of speeding related car accidents call for stricter measures to be taken. Radio Frequency Identification (RFID) presents the best ability to identify objects in a certain range. A system was created to approximate the speed of a vehicle travelling between two RFID readers. RFID readers will be placed at known, predetermined distances from each other. The passing vehicle carrying an RFID tag will broadcast its unique number to the reader which will log the exact time this vehicle has passed. By measuring the time the vehicle needed to pass two consecutive readers, the average speed can be calculated. Mean value theorem says that the vehicle's speed must be at some point equal to the average speed calculated. Speeding ticket can be issued immediately if the calculated speed exceeds the speed limit. This technique provides advantages such as, low cost, easy integration, and accurate speed measurement.

AB - The increasing number of speeding related car accidents call for stricter measures to be taken. Radio Frequency Identification (RFID) presents the best ability to identify objects in a certain range. A system was created to approximate the speed of a vehicle travelling between two RFID readers. RFID readers will be placed at known, predetermined distances from each other. The passing vehicle carrying an RFID tag will broadcast its unique number to the reader which will log the exact time this vehicle has passed. By measuring the time the vehicle needed to pass two consecutive readers, the average speed can be calculated. Mean value theorem says that the vehicle's speed must be at some point equal to the average speed calculated. Speeding ticket can be issued immediately if the calculated speed exceeds the speed limit. This technique provides advantages such as, low cost, easy integration, and accurate speed measurement.

KW - RFID

KW - Vehicle average speed measurement

KW - Visual basic

UR - https://www.scopus.com/pages/publications/84946692797

U2 - 10.1109/DeSE.2013.65

DO - 10.1109/DeSE.2013.65

M3 - Conference contribution

AN - SCOPUS:84946692797

T3 - Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013

SP - 328

EP - 331

BT - Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013

A2 - Hussain, Abir

A2 - Radvan, Roxana

A2 - Radi, Naeem

A2 - Al Jumeily, Dhiya

A2 - Tawfik, Hissam

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013

Y2 - 16 December 2013 through 18 December 2013

ER -

Al-Gindy A, Tawfik A, Sakhi L, Mohamad H, Mustafa M. RFID speed monitoring system. In Hussain A, Radvan R, Radi N, Al Jumeily D, Tawfik H, editors, Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013. Institute of Electrical and Electronics Engineers Inc. 2013. p. 328-331. 7041138. (Proceedings - 2013 6th International Conference on Developments in eSystems Engineering, DeSE 2013). doi: 10.1109/DeSE.2013.65

RFID speed monitoring system

Abstract

Publication series

Conference

UN SDGs

Keywords

Access to Document

Other files and links

Fingerprint

Cite this